Current Issue
-
2025 Vol.29, Issue 3
-
-
Breakup Characteristics of a Liquid Jet in Supersonic Crossflow Based on Homogeneous Mixture Model
균질 혼합 모델 기반 초음속 횡단 유동 내 액체 제트의 분열특성
-
Dong-Gyu Yun, Hong-Gye Sung
윤동규, 성홍계
-
Breakup Characteristics of a Liquid Jet in Supersonic Crossflow Based on Homogeneous Mixture Model
-
-
Study of the Performance of Real-Propellant Low-rotational Test for Turbopump of Staged Combustion Cycle Liquid Rocket Engine
다단 연소 사이클 액체 로켓엔진용 터보펌프의 실매질환경 저회전수 시험을 통한 성능 고찰
-
Seungwon Wang, Jin-Sun Kim, Dae-Jin Kim, Hwanil Huh
왕승원, 김진선, 김대진, 허환일
-
Study of the Performance of Real-Propellant Low-rotational Test for Turbopump of Staged Combustion Cycle Liquid Rocket Engine
-
-
Analysis of Combustion Instability in a Single-Burner Test Rig with Variations in Hydrogen Co-Firing Ratio and Thermal Power
단일버너 연소 시험리그에서 수소 혼소율 및 출력 변화에 따른 연소불안정 해석
-
Jaewoo Jang, Sanghyeon Lee, Minsung Choi, Min Kuk Kim, Jeongjae Hwang, Do Won Kang, Daesik Kim
장재우, 이상현, 최민성, 김민국, 황정재, 강도원, 김대식
-
Analysis of Combustion Instability in a Single-Burner Test Rig with Variations in Hydrogen Co-Firing Ratio and Thermal Power
-
-
Performance of a Supersonic Combustor with Tandem Cavity Flameholder According to the Fuel Injection Hole Configuration
직렬 공동형 보염기가 있는 초음속 연소기에서 연료 분사구 형상에 따른 성능
-
Inyoung Yang, Sanghoon Lee, Yang Ji Lee, Kyungjae Lee, Seung-Min Jeong
양인영, 이상훈, 이양지, 이경재, 정승민
-
Performance of a Supersonic Combustor with Tandem Cavity Flameholder According to the Fuel Injection Hole Configuration
-
-
Detonation Wave Combustion Characteristic by Fuel of Pre-Detonator
Pre-Detonator의 연료에 따른 데토네이션파 연소특성
-
Yuchang Gil, Sangho Ko, Saeyan Park, Sungwoo Park
길유창, 고상호, 박새얀, 박성우
-
Detonation Wave Combustion Characteristic by Fuel of Pre-Detonator
-
-
A Study on Improving Assembly Efficiency through the Design and Manufacturing of High-Precision Tooling
고정밀 치공구 설계와 제작을 통한 조립 효율성 향상에 대한 연구
-
SeongTae Yoon, Jang Woo Lee, KwanYoung Lee, RyungKyung Hwang, Dam Namgung
윤성태, 이장우, 이관영, 황령경, 남궁담
-
A Study on Improving Assembly Efficiency through the Design and Manufacturing of High-Precision Tooling
-