Journal of the Korean Society of Propulsion Engineers ISSN:1226-6027(Print) 2288-4548(Online) 한국추진공학회지

Park, J.W., Bae, J.H., Sim, J.H., Lee, S., Hong, Y.G., Son, T.J. and Gil, G.N., “Concept Design of Small Launch Vehicle System Using 3 tonf Class High Performance Upper Stage Engine,” Journal of Korean Society of Propulsion Engineers, Vol. 28, No. 4, pp. 47-57, 2024.

Jeon, T.J. and Park, T.S., “Development of a Numerical Method for Regenerative Cooling Channels with Phase Change of Throttleable Liquid Rocket Engine,” Journal of Korean Society of Propulsion Engineers, Vol. 27, No. 6, pp. 9-20, 2023.

Kordig, J.W., “Captive-Fired Testing of Solid Rocket Motors,” NASA SP-8041, 1971.

U. S. Department of Defense., “Structure to Resist the Effects of Accidental Explosion,” UFC 3-340-02, 2008.

Ministry of National Defense., “Defense Ammunition and Explosives Safety Management Instruction,” 2023.

Department of Defense Explosives Safety Board., “The Defense Explosives Safety Regulation 6055.09,” Edition 1, Change 1, 2024.

Kim, S.H. and Han, Y.M., “A Case Study of the Allocation of the Propulsion Test Facilities Abroad in Consideration for Explosion Blast Overpressure,” 2011 Fall Conference of The Korean Society For Aeronautical and Space Sciences, PyeongChang, Korea, pp. 438-442, Nov. 2011.

Shin, A.T., Park, B.M. and Byun, H.S., “A Study on the Calculation of Minimum Safety Distance during Storage and Combustion Test of Solid Propellants for Launch Vehicles,” Korean Chemical Engineering Research, Vol. 59, pp. 180-185, 2021.

Razionale, A., Navarra, M., Bartolomeo, G.D. and Bubbico, R., “Safety Assessment of Solid Propellants for Satellites Engines,” Chemical Engineering Transactions, Vol. 26, pp. 45-50, 2012.

Kingery, C.N. and Bulmash, G., “Airblast Parameters from TNT Spherical Air Bursts and Hemispherical Surface Bursts,” ARBRL-TR-02555, 1984.

Megaraj, M. and Grace, N., “A Review on Residual Solid Propellant Disposal Methods Using Hazard Risk Index Matrix, Risk Score Matrix, Safety Consequence Analysis and Environmental Impact Analysis,” International Journal of Occupational Safety and Health, Vol. 12, No. 3, pp. 246-255, 2022.

Adams, M.J., Emdee, J.L., George, D.J. and Peinemann., M., “Liquid Engine Test Facilities Assessment,” NASA/SE-2022-05-00041-SSC, 2002.

Takahashi, A., Kitagawa, K. and Shimada, T., “Evaluation of Safety Distance for Blast of Hybrid Rocket Propellants,” AIAA Propulsion and Energy 2019 Forum, Indianapolis, U.S.A., 2019.

U. S. Federal Aviation Administration., “Licensing and Safety Requirements for Operation of a Launch Site,” FAA-1999-5833, 2000.

U. S. Federal Aviation Administration., “Launch Safety,” 14 CFR Part 417, FAA-2000-7953, 2006.

U. S. Nuclear Regulatory Commission., “Evaluations of Explosions Postulated to Occur at Nearby Facilities and on Transportation Routes Near Nuclear Power Plants,” Regulatory Guide 1.91 Revision 3, 2021.

Bowen, I.G., Fletcher, E.R. and Richmond, D.R., “Estimate of Man’s Tolerance to the Direct Effects of Air Blast,” DASA-2113, 1968.

Hirsch, F.G., “Effects of Overpressure on the Ear – A Review,” Annals of the New York Academy of Sciences, Vol. 152, No. 1, pp. 147-162, 1968.

Baker, W.E., Cox, P.A., Kulesz, J.J., Strehlow, R.A. and Wetine, P.S., Explosion Hazards and Evaluation, Elsevier., Netherlands., 2012.

The Netherlands Organization of Applied Scientific Research, Methods for the Determination of Possible Damage to People and Objects Resulting from Releases of Hazardous Materials, Director-General of Labour., The Hague., Netherlands., 1992.

UN SaferGuard., “Temporary Storage,” International Ammunition Technical Guidelines 04.10, 2021.