Journal of the Korean Society of Propulsion Engineers ISSN:1226-6027(Print) 2288-4548(Online) 한국추진공학회지

Johnson, S. M., “Thermal Protection Materials,” NASA Report, NASA Hi Temp 2011 Boston, MA, 2011.

Kumar, L. M., Usha, K. M., and Chakravarthy, P., “Effect of Fiber Orientation on the Properties and Functional Performance of Ablative Materials for Solid Rocket Motors,” Transactions of the Indian Institute of Metals, Vol. 70, 2017, pp. 2407-2413.

Hanu, L. G., Simon, G. P., and Cheng, Y. B., “Thermal stability and flammability of silicone polymer composites,” Polymer Degradation and Stability, Vol. 91, No. 6, 2006, pp. 1373-1379.

Chou, C. L., and Kuo, T. H., “Reinforced Silicone Rubber for High-temperature Ablative Applications,” Polymer Degradation and Stability, Vol. 182, 2021.

Lee, S. H., John, J., Park, J., and Kim, J. G., “Numerical and Experimental Study of the Effects of Surface Temperature and Oxygen Mass Flux on the Ablation of Carbon–Carbon Composites,” Applied Composite Materials, Vol. 28, 2021, pp. 529-557.

Lee, B. C., Lee, D. H., Lee, Y. J., Ko, S. W., and Hyon, J. H., “A Study on Ablation Characteristics of Silicone-Based Elastomers Mixed with Glass and Ceramic Fibers”, The Korean Society of Propulsion Engineers, Vol. 27, No. 4, 2023, pp. 25-32.

Wang, Q., Bao, W., Gao, Y., Liu, S., Zuo, Z., Wu, C., and Liang, X., “Fiber and interface failure characterization of glass fiber reinforced polymer for composite insulators after liquid permeation,” Polymer, Vol. 283, 2023.

Hao, Z., Liwei, Y., Shengtai, Z., Huawei, Z., Yang, C., Mei, L., and Xiancheng, R., “A comparison of ablative resistance properties of liquid silicone rubber composites filled with different fibers,” Polymer Engineering and Science, 2020, pp. 442-452.

Meyer, L., Grishko, V., Jayaram, S., Cherney, E., and Duley, W. W., “Thermal characteristics of silicone rubber filled with ATH and silica under laser heating,” Annual Report Conference on Electrical Insulation and Dielectric Phenomena, 2002, pp. 848-852

Gao, G., Zhang, Z., Zheng, Y., and Jin, Z., “Effect of fiber orientation angle on thermal degradation and ablative properties of short-fiber reinforced EPDM/NBR rubber composites,” Polymer Composites, Vol. 31, No. 7, 2021, pp. 1223-1231.

International ASTM, “Standard Test Method for Oxyacetylene Ablation Testing of Thermal Insulation Materials,” ASTM E285-20, 2020.

Meric, G., and Ruyter, E., “Effect of thermal cycling on composites reinforced with two differently sized silica glass fibers,” Dental Materials, Vol. 23, No. 9, 2007, pp. 1157-1163.

Kong, J. H., Lee, S. Y., Song, J. H., Son, Y. I., and Kim, D. K., “Ablation Behavior of C/SiC-UHTC Composite via Oxyacetylene Torch Test with Different Flame Angles”, Proceedings of the 2021 KSPE Fall Conference, p.688, 2021.

Hao, Z., Mingyan, H., Yikai, X., Jinfeng, T., Mei, L., Shengtai, Z., and Huawei, Z., “Improving the Ablative Performance of Epoxy‐Modified Vinyl Silicone Rubber Composites by Incorporating Different Types of Reinforcing Fibers,” Polymer Composites, Vol. 45, 2024, pp. 4725-4742.

Yang, C., Liu, Z., Huang, Y., Liang, M., and Zou, H., “Catalytic Graphitized Silicone Rubber Coatings with Highly Graphitized Ceramic Layer and Superior Ablation Resistance,” Macromolecular Materials and Engineering, Vol. 307, No. 6, 2022.

Alain, D., “Solid Rocket Propulsion Technology,” Elsevier Applied Science, Pergamon, 1992.

Zhang, Y., Ling, Y., Zhang, H., Gu, X., Qiu, B., Heng, Z., Chen, Y., Zou, H., and Liang, M., “In situ construction of silicon-containing carbon layer by hyper silicone-branched structure endows epoxy/carbon fiber composites with high strength and ablation resistance,” Reactive and Functional Polymers, Vol. 203, 2024.

Zhang, G., Wang, F., Huang, Z., Dai, J., and Shi, M., “Improved Ablation Resistance of Silicone Rubber Composites by Introducing Montmorillonite and Silicon Carbide Whisker,” Materials, No. 9, 2016, p. 723.

Ray, S., and Cooney, R. P., Handbook of Environmental Degradation of Materials, William Andrew Publishing, Norwich, New York, USA, p. 185, 2018.

Stefanoski, S., Blosser, M. C., and Nolas, G. S., “Pressure Effects on the Size of Type-I and Type-II Si-Clathrates Synthesized by Spark Plasma Sintering,” Cryst. Growth Des., Vol. 13, 2012, pp. 195-197.

Benoist. O., Richard, R., Philippe, L., Dominique, M., and Gerard, F., “Crystal structure of k-alumina: an X-ray powder diffraction, TEM and NMR study,” Journal of Materials Chemistry, Vol. 7, No. 6, 1997, pp. 1049-1056.

Yang, D., Zhang, W., Jiang, B., and Guo, Y., “Silicone rubber ablative composites improved with zirconium carbide or zirconia,” Composites Part A : Applied Science and Manufacturing, Vol. 44, 2013, pp. 70-77.

Ladacki, M., “Silicon carbide in ablative chars,” AIAA J., Vol. 4, 1966, pp. 1445-1447.

Srikanth, I., Daniel, A., Kumar, S., Padmavathi, N., Singh, V., Ghosal, P., Kumar, A., and Devi, G. R., “Nano silica modified carbon–phenolic composites for enhanced ablation resistance,” Scripta Materialia., Vol. 63, 2010, pp. 200-203.