RESEARCH PAPERS
References
Salt, D.J., “Space Operations for a Newspace Era,” SpaceOps 2010 Conference Delivering on The Dream Hosted by NASA Marshall Space Flight Center and Organized by AIAA, Alabama, U.S.A., April 2010.
10.2514/6.2010-1972Regab, M.M., Cheatwood, F.M., Hughes, S.J. and Lowry, A., “Launch Vehicle Recovery and Reuse,” AIAA SPACE 2015 Conference and Exposition, California, U.S.A., August 2015.
10.2514/6.2015-4490Mirshams, M., Naseh, H. and Fazeley, H.R., “Multi-objective Multidisciplinary Design of Space Launch System Using Holistic Concurrent Design,” Aerospace Science and Technology, Vol. 33, Issue 1, pp. 40-54, 2014.
10.1016/j.ast.2013.12.015Szelinski, B., Lange, H., Rottger, C., Sacher, H., Weiland, S. and Zell, D., “Development of an Innovative Sandwich Common Bulkhead for Cryogenic Upper Stage Propellant Tank,” Acta Astronautica, Vol. 81, Issue 1, pp. 200-213, 2012.
10.1016/j.actaastro.2012.06.025Logsdon, T., Orbital Mechanics : Theory and Applications, 1st ed., John Wiley & Sons Inc., New York, N.Y., U.S.A., 1997.
Singh, Y. P., Singh, H., Sahu, P. K. and Muthukumar, R., “Common Bulkhead Tank Design for Cryogenic Stage of an Indian Launch Vehicle,” Defence Science Journal, Vol. 72, No. 1, pp. 3-9, 2022.
10.14429/dsj.72.17239Wang, P., Lei, Y. and Yue, Z., “Experimental and Numerical Evaluation of the Flexural Properties of Stitched Foam Core Sandwich Structure,” Composite Structures, Vol. 100, pp. 243-248, 2013.
10.1016/j.compstruct.2012.12.040Zhang, J., Zhang, M., Tang, W., Wang, W. and Wang, M., “Buckling of Spherical Shells Subjected to External Pressure: A Comparison of Experimental and Theoretical Data,” Thin-Walled Structures, Vol. 111, pp. 58-64, 2017.
10.1016/j.tws.2016.11.012Kim, C.W., Lim, B.J., Lee, K.J. and Park, J.S., “A Study on Fuel Selection for Next-Generation Launch Vehicles,” Journal of the Korean Society of Propulsion Engineers, Vol. 25, No. 3, pp. 62-80, 2021.
10.6108/KSPE.2021.25.3.062Wagner, H.N.R., Hühne, C. and Niemann, S., “Robust Knockdown Factors for the Design of Spherical Shells Under External Pressure: Development and Validation,” International Journal of Mechanical Sciences, Vol. 141, pp. 58-77, 2018.
10.1016/j.ijmecsci.2018.03.029Wagner, H.N.R., Hühne, C., Zhang, J., Tang, W. and Khakimova, R., “Geometric Imperfection and Lower-bound Analysis of Spherical Shells Under External Pressure,” Thin-Walled Structures, Vol. 143, 106195, 2019.
10.1016/j.tws.2019.106195Wagner, H.N.R., Hühne, C., Zhang, J. and Tang, W., “On the Imperfection Sensitivity and Design of Spherical Domes Under External Pressure,” International Journal of Pressure Vessels and Piping, Vol. 179, 104015, 2020.
10.1016/j.ijpvp.2019.104015Wang, Y., Tang, W., Zhang, J., Zhang, S. and Chen, Y., “Buckling of Imperfect Spherical Caps with Fixed Boundary Under Uniform External Pressure,” Marine Structures, Vol. 65, pp. 1-11, 2019.
10.1016/j.marstruc.2019.01.004Lee, A., López Jiménez, F., Marthelot, J., Hutchinson, J.W. and Reis, P.M., “The Geometric Role of Precisely Engineered Imperfections on the Critical Buckling Load of Spherical Elastic Shells,” Journal of Applied Mechanics, Vol. 83, No. 11, 111005, 2016.
10.1115/1.4034431Wang, S., Li, S. and He, J., “Buckling Behavior of Sandwich Hemispherical Structure Considering Deformation Modes Under Axial Compression,” Composite Structures, Vol. 163, pp. 312-324, 2017.
10.1016/j.compstruct.2016.12.050He, J., Li, S. and Wang, S., “Deformation Behavior of Sandwich Hemispherical Structure Under Axial Compression at Low Temperature,” Composite Structures, Vol. 203, pp. 267-277, 2018.
10.1016/j.compstruct.2018.05.046Lee, C.M., Sim, C.H., and Park, J.S., “Thermal Insulation Performance Comparison Using Boil-off Mass and Boil-off Rate for Common Bulkhead Structures of Space Launch Vehicles,” Journal of the Korean Society for Aeronautical and Space Sciences, Vol. 51, pp. 227-234, 2023.
10.5139/JKSAS.2023.51.4.227Sumith S. and Kumar, R.R., “Thermo-structural Analysis of Cryogenic Tanks with Common Bulkhead Configuration,” Proceedings of The Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, Vol. 236, Issue 5, pp. 900-909, 2021.
10.1177/09544100211024789Sim, C. H., Lee, C.M., Kim, G.S., and Park, J.S., “Derivation of Buckling Knockdown Factors for Hemispherical Foam Core Shells,” Proceeding of The Aerospace Europe Conference 2023 – 10th EUCASS – 9th CEAS, 2023.
Lee, C.M., Sim, C.H., Kim, G.S., Park, J.S., and Lee, J.S., “Derivation of Knockdown Factors for Common Bulkhead Structures Considering Geometric Initial Imperfection and Heat Transfer Effects,” International Journal of Aeronautical and Space Sciences, 2023 (Online First).
10.1007/s42405-023-00692-3Flores-Johnson E.A. and Li, Q.M., “Indentation into Polymeric Foams,” International Journal of Solids and Structures, Vol. 47, Issue 16, pp. 1987-1995, 2010.
10.1016/j.ijsolstr.2010.03.025Carranza, I., Crocombe,A.D, Mohagheghian, I., Smith, P.A., Sordon, A., Meeks, G. and Santoni, C. “Characterising and Modeling the Mechanical Behaviour of Polymeric Foams Under Complex Loading,” Journal of Material Science, Vol. 54, pp. 11328-11344, 2019.
10.1007/s10853-019-03673-8Dewan, M.W., Huggett, D.J., Liao, T.W., Wahab, M.A. and Okeil, A.M., “Prediction of Tensile Strength of Friction Stir Weld Joints with Adaptive Neuro-Fuzzy Inference System (ANFIS) and Neural Network,” Materials and Design, Vol. 92, pp. 288-299, 2016.
10.1016/j.matdes.2015.12.005- Publisher :The Korean Society of Propulsion Engineers
- Publisher(Ko) :한국추진공학회
- Journal Title :Journal of the Korean Society of Propulsion Engineers
- Journal Title(Ko) :한국추진공학회지
- Volume : 28
- No :2
- Pages :23-36
- Received Date : 2023-12-18
- Revised Date : 2024-03-29
- Accepted Date : 2024-04-01
- DOI :https://doi.org/10.6108/KSPE.2024.28.2.023
Journal of the Korean Society of Propulsion Engineers
